When it comes to lightweight camping, I’m always looking for little ways to make life outdoors that bit easier without adding unnecessary weight to my pack. Sometimes, the simplest ideas are the best, and this little DIY camping table is a good example.

I wanted something lightweight and compact that would provide a stable surface for cooking, particularly when camping on uneven ground or long grass. Rather than buying a purpose-made camping table, I decided to make my own using an aluminium wardrobe vent and four titanium tent stakes.

The finished table weighs just 200g, including the fixings, which I think is a worthwhile addition to my pack considering how useful it is. It can be used outside, inside a tent vestibule or even laid flat on the tent floor when additional protection is provided.

The wardrobe vent was purchased on eBay, and the remaining components are listed below.

Items required:
1 x 300mm x 150mm aluminium wardrobe vent
4 x 150mm Easton Nano tent pegs
4 x M4 x 16mm stainless steel socket cap bolts
4 x M4 stainless steel nylon lock nuts
1 x 400mm x 20mm Velcro strap

The table comfortably accommodates both my MSR 1300ml Ceramic Solo Pot and 1400ml Titanium Kettle.

The heads of the tent pegs are ground flat to allow a snug fit between the aluminium flange and the stainless steel nylon lock nuts.

The width of the flanges needs to be at least 15mm to accommodate the bolts.

The legs fold in on themselves, allowing them to sit neatly together for compact storage.

The table can also be laid flat on the ground, and with some additional protection underneath, it can be used on a tent groundsheet or footprint.

A Velcro strap is particularly useful for keeping the folded legs tightly together when packing away.

Another nice little benefit is that you can strap your foam sit-mat to the table and carry the two together in your rucksack’s external mesh pocket, keeping everything easily accessible.

The one I’m using here is the Wechsel Facila Seat, which weighs just 38g.

The table in action on Crinkle Crags, inside the vestibule of my Durston X-Mid 2.

On the summit of Pike o’ Stickle, inside the vestibule of my GoLite Shangri-La 3. Here I’m using the Oookworks half inner, which provides ample cooking space inside the tent.

Another outing on the summit of Pike o’ Stickle, this time in the vestibule of the Durston X-Mid 2.

Table with a view, from the summit of Pike o’ Stickle.

A very frosty breakfast on Shelter Crags, inside the vestibule of the GoLite Shangri-La 3.

A snowy breakfast on Crinkle Crags, inside the vestibule of the GoLite Shangri-La 3.

Sleep time on Crinkle Crags.

Back to the top